-
Legacy Member
SRS check request
Hello Milsurp friends.....I picked up this 1903 Springfield at a gunshow in Lakeland, Fl recently. It was mounted in a sporter stock, but I saw that it could easily be put back in uniform. S/N 1416620 with SA 6-31 barrel attached. ME=1 on the standard .30 cal gage. After restocking into a pre-war C-stock that I had, it performed very well at 100 yards. I noticed that there was what looked like a punch mark on the rail about an inch or so behind the front reciever band. I've read that NM recievers may show this mark. The rails are not polished, but if pressed ito service, they may have been refinished. The overall finish on the reciever is like a matte black...barrell, too. Does not look reparked. It's not gray or green or any other of those identifiable reparked colors. Anyway...thanks for your help.
Information
 |
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
-
09-26-2011 01:23 AM
# ADS
Friends and Sponsors
-
Legacy Member
It is not shown in my version of SRS. Does it have the Star Gauge mark @ 6:00 on the muzzle?
-
-
-
Legacy Member
Originally Posted by
m1903rifle
It is not shown in my version of SRS. Does it have the Star Gauge mark @ 6:00 on the muzzle?
No. There is no Star Gauge mark at the muzzle. Nor was there an alpha/numeric mark on top of the barrel. In any case, it still measures a 1 at the muzzle and it shoots wonderfully. Thanks for the input.
-
PM
